百万文字论坛中空玻璃漏气、幕墙渗水，八成问题出在胶没混匀。双组份打胶机干的活，就是把A料（主胶）和B料（固化剂）按设定比例合理喂进混合管，边混边打，比例偏一点，轻则发软不干，重则整批返工。

百万文字论坛Hollow glass leaks air and curtain wall leaks water, and 80% of the problem lies in the glue not being mixed evenly. The job of the two-component glue machine is to accurately feed A material (main glue) and B material (curing agent) into the mixing tube according to the set ratio, mix and apply at the same time. If the ratio is slightly off, it will soften and not dry, and if it is heavy, the entire batch will be reworked.

选型先问胶的脾气：

Choose first and ask about the temperament of the glue:

硅酮、聚硫做中空/幕墙，常见比例6:1~14:1，精度要稳在±2%以内，静态混合管够用；

百万文字论坛Silicone and polysulfide are used for hollow/curtain walls, with a common ratio of 6:1~14:1, and the accuracy should be stable within ± 2%. Static mixing pipes are sufficient;

百万文字论坛环氧、聚氨酯灌封电子件，比例敏感，优先伺服计量+动态混合，带压力/流量双反馈；

Epoxy and polyurethane encapsulated electronic components, proportion sensitive, priority servo metering+dynamic mixing, with pressure/flow dual feedback;

胶里带氧化铝、石英粉等填料，别用普通齿轮泵，直接上耐磨螺杆泵或柱塞泵。

The rubber contains fillers such as alumina and quartz powder. Do not use a regular gear pump, directly use a wear-resistant screw pump or plunger pump.

现场三条硬标准：

Three hard standards on site:

试机用你自己的胶，不看厂家替代液；连续出胶2小时，混合条带无花纹、无气泡；

百万文字论坛Test the machine with your own adhesive, without looking at the manufacturer's substitute solution; Continuous dispensing for 2 hours, mixed strips without patterns or bubbles;

百万文字论坛流道越短越好，混合头能热拆洗，停机自动排胶防固化；

The shorter the flow channel, the better. The mixing head can be hot disassembled and washed, and the machine will automatically drain and prevent solidification when stopped;

百万文字论坛温控别省，冬夏胶粘度差一倍，料桶/管路带加热或制冷，出胶才稳。

Temperature control is not necessary, the viscosity difference between winter and summer glue is twice, and the material bucket/pipeline is heated or cooled to ensure stable glue dispensing.

百万文字论坛运维比买机器更费心：每天完工用专用清洗剂冲混合管，胶枪停超20分钟先用A胶顶出混合胶；换胶种建议有效洗系统，不同固化剂相遇会内部结块堵管；B组分密封防潮，密封圈6–12个月查一次。

Operation and maintenance are more troublesome than buying machines: use specialized cleaning agents to flush the mixing tube every day after completion, and use A glue to push out the mixed glue after the glue gun stops for more than 20 minutes; The system must be thoroughly washed before changing the adhesive type, as different curing agents may cause internal clumping and blockage of the pipe when they meet; B component is sealed to prevent moisture, and the sealing ring should be checked every 6-12 months.

百万文字论坛买设备不是买铁壳，是买“比例稳不稳、清洗痛不痛、售后来不来得了”。

Buying equipment is not about buying iron shells, but about buying "whether the proportion is stable or not, whether cleaning is painful or not, and whether after-sales service is available or not".

本文由双组份打胶机友情奉献.更多有关的知识请点击:http://cl158.com.cn百万文字论坛我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is a friendly contribution from a two-component glue machine For more information, please click: http://cl158.com.cn We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message